Exocet® Eco-Spill Fuel Additives
Eco-Spill fuel additives are environmentally friendly products requested by fuel distributors, fuel forecourts, automotive garages, car dealerships and FMCG to clean up spills, consumer’s premises or own yards/flooring for shows or housekeeping.
Description:
Exocet Eco-Spill products are water and cotton based and contain naturally occurring microbial cultures. When in contact with oil-based hydrocarbons they harmlessly convert them into H2O and CO2.
Application:
Exocet Eco-Spill Fluid is sprayed onto dried surfaces e.g. stains and penetrates soil and even concrete. The bugs eat up any oil present (takes over 30 days for fuel spilled onto soil). It is also a great degreaser/cleaner e.g. wheels, engines, fuel tanks etc.
Exocet Eco-Spill Powder is 8 times more effective than clay absorbent. The bugs start eating the oil upon contact and the cotton-based absorbent is safe for landfill use because it is sourced from agriculture.
When to use Eco-Spill Fluid or Powder
“If its dry make it wet” – Exocet Eco-Spill Fluid XO1801CU
- Eats Oil, Fuel, Grease etc.
- Water Based
- Readily Biodegradable
- Excellent Degreaser
- Pour onto Spill Areas
- Bacteria Converts Hydrocarbons into H2O and CO2
DIRECTIONS: Spray onto dry surface and leave a few minutes to soak in. Remove with water on hard surfaces using a pressure washer for example. It will penetrate up to 18 inches in most soils and below the surface of unsealed concrete. For old or heavy soaked in stains (e.g. sleepers) remove in a small test area and repeat if necessary.
“If its wet make it dry” – Exocet Eco-Spill Powder XO1802CU
- Excellent Absorbency – Up To 8 More Times Than Clay
- 100% Bio Organic Materials
- Will Absorb Most Chemicals
- Safe for Landfill
- Converts Hazardous Hydrocarbons into H2O and CO2
Eco-Spill Powder typically absorbs between 5 and 8 times its weight (petroleum products).
DIRECTIONS: Rub powder into wet areas and leave a few minutes to soak. Collect powder using brush or shovel and drop through sieve into spill station bin. Re-use the dry powder immediately on same substance. Leave the wet clumps for approx. 30 days to allow the bacteria to work and clumps to dry out. To re-use: crush clumps, mix 50:50 with fresh powder.
Chemicals Eco-Spill Products Work on (so far):
Acetone
Bunker Fuels
Cooking Oil
Crude Oil
Cutting Oils
Diesel Fuels
Ethanol (e.g. screenwash)
Fats (animal/vegetable)
Gas Oil
Hydraulic Oils *
Isopropanol (e.g. screenwash)
Kerosene
Methanol (e.g. screenwash)
Motor/engine/gear oils *
Paraffin Oil
Petrol
Silicon Oils
Toluene
Varsol
Xylenes
White Spirit
For full list of chemicals please enquire and we can provide a more extensive list.
* Will not convert small amount of heavy metals sometimes used
Eco-Spill products both clean/absorb chemicals AND convert them into CO2 and H2O. Bacteria lie dormant for up to 5 years before use. Once used up, they die and become food for other soil and water lifeforms.
Actual Use | Business Benefits Delivered |
Filling bulk storage tank: Clean up of gas oil tank overflow into soil | 50% reduction in costs for in-situ clean up and faster hydrocarbon conversion rate |
Food processing plant: conversion of waste oil and grease | 50% reduction in energy costs to aerate waste for same conversion rate |
Bearing manufacture: cleaning up chemical spills | 47% reduction in absorbent costs compared to existing clay even when absorbent is not re-cycled |
Vehicle production plant: Slips due to wet floors | 50% reduction in slips caused by greater effectiveness of absorbent |
Drilling waste oil lagoon clean-up: 7 million litres of waste oil dispersed in 14 million litres of water | 40% reduction in costs for in-situ clean up (to max content stds) compared to disposal |
For more information please contact Fuel Additive Science Technologies to discuss meeting your needs and requirements.